Trong kho : Còn hàng
Bảo hành : 12 tháng
No 535H
Mark Levinson Nº535H
As the first five-channel amplifier from Mark Levinson, the Nº535H sets the bar high. Using a semimono-block design like the Nº533H, the Nº535H can deliver 200W per channel into all five channels simultaneously. Twelve output transistors and large amounts of capacitance per channel ensure that this amplifier is more than capable of delivering realistic dynamics and transients with audiophile-grade detail and response for even the most demanding audio tracks.
The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.
Nº535H Highlights
- Reliable, high-power in four different channel configurations provide ideal solutions for any system
- Ethernet and 12V trigger control capability for system integration
- Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
- Fully-differential circuitry with both balanced XLR and single-ended RCA inputs
Specifications
| Frequency Response | Within 0.5dB from 10Hz to 20kHz |
| Input Impedance | 60 kΩ (balanced); 30 kΩ (unbalanced) |
| Input Sensitivity | 2.83Vrms output at 130mVrms input |
| Height (with feet) | 7.65" (19.4cm); (without feet) |
| Width | 17.75" (45.1cm) |
| Depth | 19.83" (50.4cm) |
| Weight | Net weight |
| Communication and Control | One Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector |
| Inputs | Five balanced XLR inputs; five unbalanced RCA inputs |
| Rated Output Power Into 8 Ohms | 200W/ch (20Hz to 20kHz at |
| Signal-to-Noise Ratio | >85dB, reference level |
| Gain | 26.8dB |
| Power Requirements | 100V~, 120V~, 230V~, factory set for destination country |
| Speaker Connections | Five pairs loudspeaker outputs with banana-plug sockets (banana-plug socket not available on the 230 VAC models) |
| Audio Specifications | |
| Frequency Response | Within 0.5dB from 10Hz to 20kHz |
| Input Impedance | 60 kΩ (balanced); 30 kΩ (unbalanced) |
| Input Sensitivity | 2.83Vrms output at 130mVrms input |
| Height (with feet) | 7.65" (19.4cm); (without feet) |
| Width | 17.75" (45.1cm) |
| Depth | 19.83" (50.4cm) |
| Weight | Net weight |
| Communication and Control | One Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector |
| Inputs | Five balanced XLR inputs; five unbalanced RCA inputs |
| Rated Output Power Into 8 Ohms | 200W/ch (20Hz to 20kHz at |
| Signal-to-Noise Ratio | >85dB, reference level |
| Gain | 26.8dB |
| Power Requirements | 100V~, 120V~, 230V~, factory set for destination country |
| Speaker Connections | Five pairs loudspeaker outputs with banana-plug sockets (banana-plug socket not available on the 230 VAC models) |