Lượt xem: 2912
Trong kho : Hết hàng
Bảo hành : 12 tháng
The Jeff Rowland Design Capri is an exceptionally balanced preamplifier. From its sweet and extended treble, through its textured midrange, and down to its pitched, tuneful and deep bass, it delivers a broad and neutral frequency extension. Capri laces authority, dynamics, and transparent resolution with rich harmonics—rarely found in any preamplifier.
The stylish Capri is at home in any superior audio reproduction systems, ranging from space efficient setups for modern living areas to sprawling component configurations in large listening environments. Music lovers are choosing Capri over “cost-no-object” preamplifiers, regardless of underlying technology, because this world class preamplifier, created to exacting JRDG standards, delivers years of refined musical enjoyment at a real world price.
Capri S2
The Capri S2 features an impressive complement of standard input/output interfaces; greatly enhanced flexibility through its optional DAC card or phono option; and the Rowland trademark prismatic platinum faceplate beautifully integrated into a non-resonant chassis milled from a solid block of aluminum.
With an output impedance of only 80 Ohms balanced and 40 Ohms single ended, Capri S2 drives any amplifier with confidence. Whether serving a single-ended triode amplifier in a vinyl rig, or controlling a quartet of solid-state Rowland M525 monoblocks with a 192 kHz digital source, or at the nexus of a home theater setup, the Capri S2 preamplifier delivers the trademark Rowland musicality, resolution, and consistent authority.
COMPACT ELEGANCE
Balanced preamplifier design housed inside a low profile, compact, ultra-low resonance, structurally rigid chassis that is precision-machined from solid blocks of aircraft grade 6061-T6 aluminum that is completely sealed for trouble-free operation and high RF and EMI isolation. Features an elegant front panel precision-machined and sculpted with a diamond tipped cutting tool.
UNIVERSAL POWER SUPPLY
Low noise, high-current, dual regulated switch- mode auto sensing and auto ranging power supply provides Capri with optimum performance at any world-wide mains operating voltage.
CORE WITH SHORTEST SIGNAL PATH
The astonishing sonic nimbleness and musical performance of Capri is made possible by the same dual TI Burr Brown OPA1632—fully differential high speed I/O audio amplifier modules--used in the core of the Criterion reference preamplifier. These modules feature extreme linearity, super low noise and distortion. As a result, Capri sports the shortest signal path of any Rowland preamplifier ever for an incredible musical experience.
I/O FLEXIBILITY
Dual low impedance line-level outputs (80 Ohms balanced, 40 Ohms unbalanced), 48 KOhms balanced and unbalanced inputs, and preamp bypass inputs allow unprecedented compatibility with audio and A/V components, while optional high quality phono cards are available for compatibility with vinyl sources.
REMOTE CONTROL
Six-function remote control transmitter adjusts volume, input selection, mute, and channel balance.
PRECISION VOLUME ADJUSTMENTS
Dual rate volume control allows precision level adjustments over nearly a 100 dB range. The volume control incorporates a permanently noiseless optical encoder that always maintain its tactile feel, accuracy, and channel balance at all settings. The volume can be adjusted from 0dB to 99.5dB from the volume knob on the front panel, as well as from the 6 function remote control. Rapid turns of the volume control adjust the volume by 1.5dB increments. Slow turns of the control allow for very fine adjustments by 0.5dB increments.
IEC
15 Amp female IEC AC power connector.
GREEN TECHNOLOGY
Modest power consumption of mere 6 Watts permits constant power-up operation to eliminate warm-up time and maximize musical performance, and allows Capri to operate enclosed into an entertainment unit.
Specifications
| Overall Gain | 14 dB |
| Gain Range | 99.5 dB, 199 Equal Increments |
| Frequency Response | 10 Hz – 350 kHz, -3 dB |
| DAC Card (optional) | Internal DAC card accepts all SPDIF digital signal sources from 44.1 to 192 kHz |
| Phono Card (optional) | Adjustable for simple load and gain adjustments for MM, high-output MC and MC cartridges |
| Inputs | 2 x Pair Balanced XLR, 1 x Pair Unbalanced (RCA) Unity Gain (Bypass), 2 x Pair Unbalanced RCA |
| Outputs | 1 x Pair Balanced Line Level, 1 x Pair Unbalanced Line Level |
| Weight | 9.5 lbs / 4.26 kg |
| Dimensions | 2.6”(H) x 13.7” (W) x 6.2” (D) / 6.7 cm (H)x 35 cm (W) x 15.7 cm (D) |
Video ở đây