Tìm kiếm sản phẩm : Magico

Từ mẫu loa cột A3 đầu tiên của dòng A, Magico đã phát triển thêm đôi bookshelf A1. A1 vẫn kế thừa đầy đủ những công nghệ và kếu cấu phần cứng làm nên tên tuổi của Magico.

The inspiration for the new A3 was driven by the engineering challenge to create not only a full range loudspeaker that incorporates similar design philosophies found in higher-end Magico offerings but to provide an entry level category that is accessible to a new and wider audience of music enthusiasts.

Multi-channel soundtracks for movies and music include a dedicated center channel track of information that can range from subtle to explosive in a split second. In order to properly reproduce these dynamic swings of micro and macro information, a full range center channel loudspeaker that matches the speed and integrity of the front L/R loudspeakers is imperative.

Whether in music or movie soundtracks - the rhythmic beat of deep powerful bass resonates with our inner core and generates excitement levels that can raise goosebumps. The ASUB expands the sound dimension capabilities of the A5, A3, the A1 or any other speaker with thundering low-bass frequency reinforcement. The ASUB features a fully braced aluminum enclosure, ultra-stiff aluminum cone, internal power amplification, electronic crossover and DSP control center. A true Magico loudspeaker design offering superb performance with extensive control and uncompromised engineering deserving of the Magico M engraving.

Our materials science research in the properties and applications of carbon allows the M2 to feature a new monocoque enclosure. Similar in construction technique introduced in the M6, it is formed using multiple layers of carbon fiber adding up to a 3/8” thickness. Similar to the external shell of an F-35 fighter jet, this enclosure construction compared to machined or extruded aluminum parts increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.

-Củ loa: 1 X 1” (2.8cm) Diamond Coated Beryllium Dome Tweeter 1 X 6” (12.24cm) Graphene Nano-Tec Midrange 3 X 7” (17.78cm) Graphene Nano-Tec - Độ nhạy: 91dB - Trở kháng: 4 Ohms - Tần số đáp ứng: 24 Hz – 50 kHz - Công suất đề nghị: 20-500 Watts - Kích thước: 120cm x 49cm x 34cm - Cân nặng: 145 kg

The M6 is a floor standing, three-way, five-driver loudspeaker design that establishes a new pinnacle of engineering and design vision at Magico. Since the release of the M-Project in 2014, Alon Wolf and his engineering team have worked to expand upon the ground breaking designs that were first introduced in the critically acclaimed product which included the application of carbon side panels. The new M6 represents the culmination of such efforts and a major advance in loudspeaker design. The most compelling aspect is the six-sided, monocoque enclosure sculpted of ½” carbon fiber, leveraging the latest Aerospace materials and technologies.

Built around the renowned Q platform, the Q-Subs set new standards in low frequency sound reproduction. Capable of delivering 136 dB sound pressure level with less than 1% total harmonic distortion at 20Hz[i], the message is simple: if you think you have heard low frequencies before, think again.

- Độ nhạy: 88dB
- Trở kháng: 4 ohms
- Tần số đáp ứng: 24Hz-50kHz
- Công suất ampli tối thiểu: 50W
- Kích thước: 48”H x 12”D x 12”W (122cm x 30cm x 30cm)
- Trọng lượng: 170lbs (77Kg)

- Độ nhạy: 88dB
- Trở kháng: 4 ohms
- Tần số đáp ứng: 20Hz-50kHz
- Công suất ampli tối thiểu: 50W
- Kích thước: 48"H x 14"D x 15"W (122cm x 36cm x 38cm)
- Trọng lượng: 220 lbs. (100 kg)

- Độ nhạy: 89dB
- Trở kháng: 4 ohms
- Tần số đáp ứng: 20Hz-50kHz
- Công suất ampli tối thiểu: 50W
- Kích thước: 53.72"H x 15.28"D x 17.48"W (136.4cm x 38.8cm x 44.5cm)
- Trọng lượng: 300 lbs. (136 kg)

- Độ nhạy: 89dB
- Trở kháng: 4 Ohms
- Đáp ứng tần số: 22 HZ – 50 kHz
- Công suất ampli đề nghị: 50 – 1200 Watts
- Kích thước(HxWxD) : 50.54x58.42x64.77cm
- Trọng lượng: 160 lbs (72.57 kg)

Mang thiết kế đứng thẳng, thùng loa của S-SUB được gia công CNC từ một ống nhôm định hình (theo phương pháp đùn) với thành dày 12mm. S-SUB sử dụng cặp woofer 12 inch của Magico. Chúng được gắn ở mặt trước theo chiều thẳng đứng để tạo ra một trường âm thanh rộng.

The new S3 features an appearance that is at once refined and fortified. With a newly engineered enclosure assembled from four separate extruded aluminum panels ranging in thickness from 1/2” to 2-inches, the S3’s enclosure is ambitious to say the least. Each panel, including the front baffle, is carefully machined to take on an overall edgeless-shaped perimeter.

The new S3 features an appearance that is at once refined and fortified. With a newly engineered enclosure assembled from four separate extruded aluminum panels ranging in thickness from 1/2” to 2-inches, the S3’s enclosure is ambitious to say the least. Each panel, including the front baffle, is carefully machined to take on an overall edgeless-shaped perimeter.

The new A5 is a flagship A-Series model (3 way / 5 driver design) which incorporates the company’s first 5-inch pure midrange driver as well as enhanced midrange and bass driver cone technology. These new advanced cones achieve unprecedented stiffness-to-weight ratio, a key parameter that Magico has pursued over the past 15 years. The massive, sealed enclosure of the A5 is formed entirely of 6061-T6 aircraft grade aluminum, the same material and construction methods as in Magico’s acclaimed Q-Series. Complex internal bracing helps stiffen the entire enclosure and minimize unwanted resonances and colorations, allowing all drivers to perform with stunning resolution and dynamics.

A summation of our no-holds-barred assault on the limits of dynamic loudspeaker design, the new Magico M9 establishes new benchmarks in musicality, transparency, and fidelity. This four-way, six-driver floor standing system features the world’s first loudspeaker enclosure to combine inner and outer skins of carbon fiber with a revolutionary aluminum honeycomb core. Included with the M9 is a state-of-the-art analog outboard active crossover, the MXO. Designed in-house, this carefully crafted unit handles bass/midbass frequency separation. In addition, the M9 benefits from our latest generation of Nano-Tec speaker cones, featuring Aluminum honeycomb cores. The result is a revelation, a loudspeaker that can present intense crescendos with unconstrained power yet reproduce the most delicate musical passages with transparency and stunning micro dynamic detail.