- Giới thiệu
- Sản phẩm
- Tài liệu Download
- Đại lý
- Liên hệ
Trong kho : Còn hàng
CÔNG TY TNHH - TM DỊCH VỤ HOÀNG HẢI
Trụ sở : 23D Hai Bà Trưng - Hà Nội
Hotline : Mr.Hải 0913225494 - Ms. Hường 0988411505
Trụ sở : 258 Phố Huế - Hà Nội
Hotline : Mr.Thắng 0913207153
CÔNG TY TNHH TM ĐIỆN MÁY SƠN HÀ
Chi nhánh 1 : 41 Huỳnh Thúc Kháng, P.Bến Nghé, Q.1
Chi nhánh 2 : 859 Trần Hưng Đạo, F 1 Q 5 HCM
Hotline : Chị Hà 0908812754/0908812397
- 2008 - Enjoy the Music.com - Best of 2008 - Aries 3
THE ARIES 3 IS THE PERFECT CHOICE FOR THOSE WHO WANT NEAR-HR-XPERFORMANCE IN A SMALLER SIZE.
The 1.75"-thick platter is comprised of non-resonant acrylic and incorporates an inverted bearing similar to that used in the HR-X. The bearing shaft is 60 Rockwell hardness, ground and polished, and the platter rotates on a Teflon/Delrin composit thrust plate for ultra low noise.
The solid stainless steel motor assembly is almost 15 pounds and contains a smooth 300-RPM synchronous motor with Delrin motor pulley. This is a very low noise system with the fundamental resonance of the motor at 5 Hertz which is well below the frequency a cartridge can reproduce.
The Aries 3 chassis is made from a sandwich of 2 layers of 5/8” polished black acrylic top and bottom with a 5/8” thick aluminum center section, exactly like the HR-X chassis design which provides stability and damping. This system creates an inert, quiet, and stable platform for the platter and tonearm to sit on. The plinth is supported by four aluminum cones, the bottoms of which are composed of hardened steel balls. The cone suspension when applied to the laminated HR-X type chassis provides outstanding rigidity and a wealth of information from the record grooves. They are adjustable for leveling.
The Aries 3 circular armboard is a 4” Sdiameter, 1" thick black acrylic that mates sonically with the HR-X style laminated chassis.
The Aries 3 is available with or without a VPI tonearm.
For best sound VPI recommends the Aries 3 with JMW-10.5i tonearm for a truly musical system.
The Aries 3 can be taken to the next level by adding VPI’s Synchronous Drive System, periphery ring, new Mini TNT feet, and HR-X center weight at an additional cost.
SIZE - 22" X 16"
Video ở đây