JBL Synthesis
Lượt xem: 1551

Trong kho : Còn hàng

Bảo hành : 12 tháng

The SDP-5 is compatible with popular 7.1- and 6.1-channel surround sound decoding formats, including THX Surround EX™, Dolby* Digital EX, DTS-ES® 6.1 Discrete and DTS-ES 6.1 Matrix; it’s also compatible with DTS 96/24 high-resolution audio decoding. The SDP-5 also incorporates Harman International’s exclusive 7.1 Logic 7® processing, a sophisticated DSP system that provides improved, derived multichannel reproduction from both matrix-encoded and two-channel stereo recordings.

Read More

JBL SDP-5

Features

Immersive High Resolution Sound

16 channels of discrete high resolution processing with 4 user configurable channels enable a plethora of set up options for Dolby Atmos, DTS:X and Auro 3D immersive surround sound applications.

Dante Network Audio

Bridge the gap between residential and commercial applications. All 16 channels of processed audio, plus Zone 2 can be routed on a single CAT5e or CAT6 cable over a standard network. Dante is easy to set up and compatible with Dante enabled JBL Synthesis amplifiers.

IMAX Enhanced

IMAX Enhanced certified AV receiver, featuring DTS:X immersive audio decoding that is optimized to properly reproduce the full dynamic range of IMAX theatrical sound mixes available in IMAX Enhanced content.

Network and Bluetooth Streaming

Control your favorite content over Ethernet or Wi-Fi, Chromecast built-in, Apple AirPlay 2, Roon, the Harman Luxury MusicLife app, play directly from a USB flash drive, or stream via Bluetooth with aptX HD.

Balanced XLR Outputs

A transformerless balanced output of 2V RMS (max. 10V RMS) ensures ample gain and common mode noise rejection. Cinematic Video Experience

Dolby Vision, HDR10+, HDR10, HLG, HDMI, HDMI2.0b with HDCP2.2, 4K “Ultra HD” as well as 3D video capabilities are built in.

Designed for the Integrator

With an available rack mount kit, Dante, eARC and an internal configuration page, Dirac Live, IP, IR RS232 and iOS and Android App control the install, set up, and calibration has never been easier.

Logic 16

Logic 16 will up-mix any input source from mono up to 15.1, including all Dolby formats with natural astonishing 3D sound. In addition, Dolby, DTS Neural:X, and Auro 3D upmixers are on board.

Specifications

Stereo line inputs
Maximum input 4.5Vrms
 Nominal sensitivity 1V, 2V, 4V (user adjustable)
 Input impedance 47kΩ
 Signal/noise ratio (A-wtd ref 100W) normal/stereo direct 100dB/110dB
 Frequency response 20Hz–20kHz ± 0.1dB
 Preamplifier outputs
 Nominal output level (single-ended/balanced): 1V RMS/2V RMS (max. 5V RMS/10V RMS)
Output impedance 560Ω
THD+N (20Hz–20kHz) -100dB
 Headphone output
 Maximum output level into 32Ω  5Vrms
Output impedance 560Ω:<100Ω
General
 Mains voltage 110–120V or 220–240V, 50–60Hz
 Power consumption (maximum) 50W (Thermal dissipation approx. 170 BTU/hour)
 Power consumption (idle, typical) 40W (Thermal dissipation approx. 170 BTU/hour)
 Power consumption (standby) <0.5W
 Dimensions: W x D x H 17 x 16.7 x 6.7" (433 x 425 x 171mm)
 Weight (net) 23.4lbs

Video ở đây