Ovator S-600

Còn hàng
2673
273.600.000 VND

Miêu tả sản phẩm

  
Ovator S-600 được thiết kế bởi Naim tại Anh, gia công tại Đức và mang trong mình những công nghệ âm thanh tiên tiến nhất.
 
naim ovator s600 hi-end
Cặp loa Naim Ovator S-600 tại Thanh Tùng Audio
 
naim ovator s600 hi-end
 
Ông David Amey, đại diện từ Naim
 
naim ovator s600 hi-end
Quyến rũ với thiết kế sang trọng
 
naim ovator s600 hi-end
Cận cảnh loa phải
 
naim ovator s600 hi-end
Loa trái
 
naim ovator s600 hi-end
Chiếc loa được chia làm 2 khoang riêng biệt, phía dưới là dải âm thấp
 
naim ovator s600 hi-end
Phía trên là dải âm cao, 2 dải tần
 
naim ovator s600 hi-end
2 loa Bass cho riêng 2 khoang
 
naim ovator s600 hi-end
Balance Mode Radiator (BMR) dạng treo ở phía trên
 
naim ovator s600 hi-end
BMR nhìn từ phía sau loa
 
naim ovator s600 hi-end
Ovator S-600 có dải tần 28Hz - 35kHz
 
naim ovator s600 hi-end
Chân đế vững chãi
 
naim ovator s600 hi-end
Cổng kết nối được đặt ở phía sau chân loa
 
naim ovator s600 hi-end
Tiếp xúc với mặt đất bằng 4 chân thép không gỉ gia cường

Cặp loa có giá khoảng 12.000 USD
  
 
The first of our Ovator range of loudspeakers, the S-600 was also the first high-end hi-fi loudspeaker to use the game-changing advantages of BMR drive unit technology and it remains a reference product within its class. A larger and more powerful speaker than the S-400, it employs twin 200mm bass drivers for greater low-frequency extension in larger listening rooms. By using the same suspended enclosure technology in the larger S-800 model, its 85mm BMR is also isolated from undesirable resonances.
  • Twin 200mm bass drivers and 85mm Balanced Mode Radiator (BMR)
  • Frequency response down to 28Hz, and up to 35kHz
  • Ultra-rigid multi-composite enclosure, strategically mass damped and internally sub-divided to provide optimum loading volumes for each drive unit
  • Decoupling leaf spring suspension between die-cast plinth and enclosure to avoid low-frequency colouration
  • Twin-spring decoupling suspension plus cylindrical aluminium enclosure to optimise BMR performance
  • Available in Ash and Rosewood

The Ovator S-600's balanced mode radiator (BMR) constitutes its most visible technological advance, yet the performance of this loudspeaker is equally the result of painstaking refinement in numerous elements of design, construction, and material selection.

For example, there is so much more to the musical reproduction of bass than low frequency extension, so the Ovator S-600 LF driver is designed not simply to play bass, but to do so with faultless musical accuracy. It incorporates a multitude of electro-acoustic details aimed at minimising distortion and compression, and the result is extended bass with peerless timing, dynamics, and pitch accuracy.

The Ovator S-600 crossover network is housed within the plinth and divides the audio signal between bass drivers and BMR with fourth order acoustic slopes at 380Hz. Each component selection is the result of intense technical analysis and listening, and the component arrangement is fundamentally informed by the layout and earthing techniques developed for Naim Audio power amplifiers. A crossover module suspension system and individual component decoupling ensures any chance of microphony is minimised. Conversion to either bi-amp or tri-amp active drive is easily achieved through removal of the crossover module.