Scarlatti Transport is intended to be used with the matching Scarlatti DAC or with any suitable industry standard DAC. The unit may be run in Master mode or by using the DAC as the system clock
Còn hàng
12 tháng
3904
672.000.000 VND
($ 32.000)
Scarlatti Transport uses the TEAC Esoteric VRDS NeoTM mechanism which provides a brushless motor with heavy flywheel for stable disc rotation and super rigid construction. All signal processing and electronics in the transport is dCS.
Scarlatti Transport features a IEEE 1394 Firewire link which outputs dCS -encrypted DSD (1 bit data at the rate of 2.822MS/s) to a dCS DAC from CD or SACD. Scarlatti Transport upsamples CD data to DSD and transmits the data over the 1394 interface. SACDs are played in their native DSD format, again over the IEEE 1394 interface. Native CD data is available from 7 PCM outputs (2x AES/EBU and 4x SPDIF, 1x SDIF-2), as is down-sampled SACD data.
Scarlatti Transport is intended to be used with the matching Scarlatti DAC or with any suitable industry standard DAC. The unit may be run in Master mode or by using the DAC as the system clock. Performance will be enhanced further by adding the Scarlatti Master Clock to the system.
All of the Scarlatti products benefit from our ‘soft' approach to programmable logic which allows new software to be loaded from a dCS update CD to add new features and adapt to changes in digital formats.
CD data is available as native 16/44.1 and upsampled to DSD.
SACD data is available as native DSD and down-sampled to 16/44.1.
analogue outputs
N/A
digital I/O
OUTPUTS
IEEE 1394 interface on 2x 6-way connectors. The interface outputs dCS-encrypted DSD (1 bit data at 2.822MS/s).
2x AES/EBU on 3-pin male XLR connectors. Each outputs CD format data (16 bits at 44.1kS/s), whether a CD or SACD is playing.
2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each outputs CD format data, whether a CD or SACD is playing.
1x SPDIF optical on a Toslink connector, outputs CD format data, whether a CD or SACD is playing.
1x SDIF-2 PCM interface on 2x BNC connectors, outputs CD format data, whether a CD or SACD is playing.
word clock I/O
INPUT
Word Clock Output on 1x BNC connector. With the transport in Master mode, a TTL-compatible 44.1kHz word clock derived from the internal crystal oscillator is available on this output. The calibration accuracy when shipped is +/-10ppm, not temperature compensated.
OUTPUT
Word Clock Input on 1x BNC connector, accepts standard word clock at 44.1kHz. Sensitive to TTL levels.
clock frequencies
44.1kHz in Master Mode. Calibrated within +/-10ppm, not temperature compensated.
residual noise
N/A
spurious responses
N/A
filters
N/A
software updates
Updates loaded by CD-R.
software version
1.00
local control
Philips Pronto™ programmable remote control is supplied with the Scarlatti Transport, or RS232.
The current dCS configuration for the Pronto is 2.10.
power supply
Factory set for 100, 115, 220 or 230 V AC, 49 – 62Hz.
